A body armour plate for in a bullet proof vest which doubles as a military shield shovel.
With a certain mechanism so a handle can be put in or on. Maybe with a thread mechanism, or a clicking mechanism. Or simply with the handle attached and a certain vest.
Extra: Double ballistic plate possibility
By Jef Koelewijn
From the Netherlands
Written on: 27-01-2020
This blog is about military trainings, military knowledge, military technology and basicly about all kinds of weapons.
maandag 27 januari 2020
A body armour plate for in a bullet proof vest which doubles as a military shield shovel
Labels:
2020,
Army,
Ballistic plate,
Body armour,
Bullet proof,
Bullet resistant,
Defence,
Defense,
Mercenary,
Military,
Militia,
New,
Protection,
Shield,
Shield shovel,
Shield spade,
Shovel,
Spade
donderdag 17 oktober 2019
Cryogenic hardened steel bullet resistant, ballistic plate
Cryogenic hardened steel bullet resistant, ballistic plate
-Mainly done with liquid nitrogen.
Maybe as an extra tempering method to make it even harder.
Maybe first: Normal tempering. And baking tempering for 1-2 or more hours.
By Jef Koelewijn
From South-Holland, The Netherlands
Labels:
Army,
Ballistic,
Bullet proof,
Bullet resistant,
Bulletproof,
Cryogenic hardening,
Freeze tempering,
Mercenary,
Military,
New,
Plate,
Plates,
Protection,
Shielding
maandag 7 oktober 2019
Handgun cocking with tied hands
Handgun cocking with tied hands
Important: using dry fire rounds offcourse for trying this out and for training this.
-Warning: A finger or skin maybe, might get stuck by the ejection port
And it's more only for if really needed.
It's very dangerous with a real round, because a handgun can go off because of a fall,
though most modern handguns do have a safety and it's possible to accidentually
hit and pull the trigger with a finger.
1 You don't have to tie up the hands, just holding the hands and or wrists together
in multiple ways is possible.
2 It might be useful to warm up the wrists a bit according to my experience.
It's possible to cock a handgun with tied hands by hooking the rear sight to 90 degree angled furniture.
90 degree angled walls.
And more.
It's possible to cock a handgun by trying things out with both hands and or wrists together.
And it's possible to cock a handgun by using the teeth, but it's dangerous for the teeth and I would not advice doing it unless really needed or maybe with some padding on the biting area just to try it out.
I all thought this up myself. So it's mostly experimental.
By Jef Koelewijn
From South-Holland, The Netherlands
Important: using dry fire rounds offcourse for trying this out and for training this.
-Warning: A finger or skin maybe, might get stuck by the ejection port
And it's more only for if really needed.
It's very dangerous with a real round, because a handgun can go off because of a fall,
though most modern handguns do have a safety and it's possible to accidentually
hit and pull the trigger with a finger.
1 You don't have to tie up the hands, just holding the hands and or wrists together
in multiple ways is possible.
2 It might be useful to warm up the wrists a bit according to my experience.
It's possible to cock a handgun with tied hands by hooking the rear sight to 90 degree angled furniture.
90 degree angled walls.
And more.
It's possible to cock a handgun by trying things out with both hands and or wrists together.
And it's possible to cock a handgun by using the teeth, but it's dangerous for the teeth and I would not advice doing it unless really needed or maybe with some padding on the biting area just to try it out.
I all thought this up myself. So it's mostly experimental.
By Jef Koelewijn
From South-Holland, The Netherlands
Labels:
Captivity,
Cocking,
Document,
Escaping,
Handgun,
Handgun cocking,
Handguns,
Hands tied,
Info,
Information,
Interesting,
Jef Koelewijn,
Knowledge,
Mercenary,
Miliitary,
New,
Tied hands,
Training
Handgun cocking with one hand
Handgun cocking with one hand
-Only with right
-Only with left
Important: Using dry fire rounds offcourse for trying this out and for training this.
-Warning: A finger or skin maybe, might get stuck by the ejection port, but there are
ways to prevent this by doing it correctly.
And it's more only for if really needed. It's very dangerous with a real round, because a handgun can go off because of a fall, though most modern handguns do have a safety and it's possible to accidentually hit and pull the trigger with a finger.
You can single handedly cock a handgun by rotating the gun 90 degrees downward and then
pulling the slide with 4 fingers while the thumb holds the handgun in place and also pushes down.
By Jef Koelewijn
From South-Holland, The Netherlands
-Only with right
-Only with left
Important: Using dry fire rounds offcourse for trying this out and for training this.
-Warning: A finger or skin maybe, might get stuck by the ejection port, but there are
ways to prevent this by doing it correctly.
And it's more only for if really needed. It's very dangerous with a real round, because a handgun can go off because of a fall, though most modern handguns do have a safety and it's possible to accidentually hit and pull the trigger with a finger.
You can single handedly cock a handgun by rotating the gun 90 degrees downward and then
pulling the slide with 4 fingers while the thumb holds the handgun in place and also pushes down.
By Jef Koelewijn
From South-Holland, The Netherlands
Labels:
Airsoft,
Cocking,
Document,
Handgun,
Handgun cocking,
Handguns,
Information,
Mercenary,
Mercenary training,
Military,
Military training,
One handed,
Text,
Training,
With one hand
vrijdag 27 september 2019
dinsdag 17 september 2019
Handgun as an improvised weapon techniques (update)
1:
Thrusts with the front side of the handgun, at the side of the muzzle.
Hammering with the underside of the grip, with the underside of the magazine.
-Can be done multiple ways
Hooks with the side of the rear side of the handgun.
-I thought this one up myself, and it's experimental, I haven't tested it against
something yet (I've only got a replica which can't shoot bullets)
-
2:
Turning the handgun upside down and hammering with the side of the rear side
Thrusts with the front side of the handgun, at the side of the muzzle.
Hammering with the underside of the grip, with the underside of the magazine.
-Can be done multiple ways
Hooks with the side of the rear side of the handgun.
-I thought this one up myself, and it's experimental, I haven't tested it against
something yet (I've only got a replica which can't shoot bullets)
-
2:
Turning the handgun upside down and hammering with the side of the rear side
Labels:
2019,
Army,
Bludgeon,
Blunt,
Document,
Handgun,
Improvised,
Information,
Mercenary,
Military,
Techniques,
Text,
Texts,
Training,
Trainings,
Weapon,
Weapons
maandag 2 september 2019
I found the following: Hollow shotgun slugs and shotgun slugs of which the outside folds open
1 Hollow shotgun slugs and
2 Shotgun slugs of which the outside folds open
Extra, an idea of mine: Shotgun sawtooth slugs
They are for maximum tissue damage
Some knowledge:
Hollow points are banned in international warfare
2 Shotgun slugs of which the outside folds open
Extra, an idea of mine: Shotgun sawtooth slugs
They are for maximum tissue damage
Some knowledge:
Hollow points are banned in international warfare
Abonneren op:
Posts (Atom)